topic Re: Migrate from ASA 5505 to a PA 3020 in General Topics

Migrate from ASA 5505 to a PA 3020

infotech — Thu, 07 Nov 2013 14:21:09 GMT

Any one know the best what to migrate this configuration from a Cisco ASA 5505 to a PA 3020 here it show run information for the interfaces from the ASA 5505

interface Ethernet0/0

switchport access
vlan 900

interface Ethernet0/1

switchport access
vlan 300

interface Ethernet0/2

switchport trunk
allowed vlan 1,999

switchport trunk native vlan 1

switchport mode trunk

interface Ethernet0/3

switchport trunk
allowed vlan 1,999

switchport trunk native vlan 1

switchport mode trunk

interface Ethernet0/4

switchport access
vlan 999

interface Ethernet0/5

interface Ethernet0/6

switchport access
vlan 300

interface Ethernet0/7

switchport access vlan 999

Re: Migrate from ASA 5505 to a PA 3020

_slv_ — Thu, 07 Nov 2013 15:39:23 GMT

Please ask a partner who sell you PA device for Migration Tool or download it from your partner portal (if You have account)

This tool help you with config migration .

Regards

Slawek

Re: Migrate from ASA 5505 to a PA 3020

infotech — Thu, 07 Nov 2013 17:03:58 GMT

Well I did that with an SE on the first PA but I didn't really learn anything about how it works so I was hoping to try manually configuring my DR site so I might be able to better grasp the concepts of how the PA works

Re: Migrate from ASA 5505 to a PA 3020

Retired Member — Thu, 07 Nov 2013 17:16:57 GMT

What kind of ASA version do you have? ASA 8.4 version is not migrated certainly using migration tools and NAT rules are not supported.

You should check in detail for NAT rules and NAT related security rules for migration.

Thanks.

Regards,

Roh

Re: Migrate from ASA 5505 to a PA 3020

infotech — Thu, 07 Nov 2013 17:54:41 GMT

Right NAT's, firewall rules,VPN tunnels do not migrate with the tool. This is my second PA, 1st one the SE did the conversion and it helped but there was a lot of manual configuration needed to be done. But my biggest concern is starting with the interfaces that are listed in my original post I want to learn how to manual migrate the settings.