topic Re: Terminate Session in General Topics

Terminate Session

AAW_Company — Tue, 11 Feb 2014 14:18:25 GMT

Hi all

is clearing the session from Session browser terminate the session which is open , as it still show up and the bytes are still increasing

Regards

Re: Terminate Session

HULK — Tue, 11 Feb 2014 15:38:52 GMT

Yes, It should terminate the active session on the PAN firewall.

As per the DOC How to Clear Sessions from the Session Monitor , clearing a session from session browser is as good as clearing it from CLI ( > clear session ID xyz).

The session you have cleared from session browser, could you please verify the same from CLI also.

> show session ID xyz

Example:

Thanks

Re: Terminate Session

Retired Member — Tue, 11 Feb 2014 15:43:38 GMT

is it a udp session ?

Re: Terminate Session

pulukas — Wed, 12 Feb 2014 02:32:24 GMT

Are you sure it is the same session ID?

Perhaps the client is just immediately creating a new session because the traffic still continues after the session is killed.

Re: Terminate Session

mbutt — Wed, 12 Feb 2014 05:16:35 GMT

I have just test it in the lab. It seems like if you clear the session on 6.0.0 from the GUI/CLI it is not clearing the session. Instead the session still stays in the session table. It seems to be a bug in 6.0.0. I would recommend to open a case with Technical support so it can be filed as a bug and issue can be fixed in upcoming releases.

Thank you

Numan

Re: Terminate Session

AAW_Company — Wed, 12 Feb 2014 07:18:49 GMT

I have check the ID it's the same id the session isn't terminated

Re: Terminate Session

AAW_Company — Wed, 12 Feb 2014 07:25:40 GMT

Even when I use CLI the session isn't terminated, the session still active

Re: Terminate Session

mbutt — Sat, 15 Feb 2014 01:01:41 GMT

Hi ,

As mentioned previously open a case with support it seems to be a bug.
When you open a case with support please collected the following

1. Steps to reproduce

2. Screen shots or output of the CLI commands run

3. Details of the above output.

This will help the support is determining the issue faster. Hope this helps.

Thank you

Numan