topic Re: Respond to ARP for path-monitor IP in virt-wire mode? in General Topics https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39233#M28781 <HTML><HEAD></HEAD><BODY><P>@KMacnaughton:</P><P></P><P>What hardware platform are you using for this setup?</P><P></P><P>-Benjamin</P></BODY></HTML> Fri, 26 Aug 2011 03:45:59 GMT bpappas 2011-08-26T03:45:59Z Respond to ARP for path-monitor IP in virt-wire mode? https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39232#M28780 <HTML><HEAD></HEAD><BODY><P>Does anyone know if PANOS 4.0 responds to ARP requests for the IP used in HA path-monitoring?</P><P></P><P>I know that path-monitor sends pings or something similar to the devices it is monitoring.&nbsp; When you setup path-monitoring, you specific what source IP should be used for the pings.&nbsp; I also know that in virtual-wire, the monitored devices have to be on the same subnet as the source IP.</P><P></P><P>What I've got is a device that I'm using as one of the monitor points insists on doing an ARP request back for the source IP of the path-monitor ping, and it appears that the PA does not respond to ARP requests for the path-monitor IP.&nbsp; This leads to a path-monitor down status for that monitored device.&nbsp; However, when I hardcode the ARP entry for the PA source IP on the monitored device, the responses come through and path-monitor reports that host as up.</P></BODY></HTML> Thu, 25 Aug 2011 19:22:36 GMT https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39232#M28780 Mack 2011-08-25T19:22:36Z Re: Respond to ARP for path-monitor IP in virt-wire mode? https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39233#M28781 <HTML><HEAD></HEAD><BODY><P>@KMacnaughton:</P><P></P><P>What hardware platform are you using for this setup?</P><P></P><P>-Benjamin</P></BODY></HTML> Fri, 26 Aug 2011 03:45:59 GMT https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39233#M28781 bpappas 2011-08-26T03:45:59Z Re: Respond to ARP for path-monitor IP in virt-wire mode? https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39234#M28782 <HTML><HEAD></HEAD><BODY><P>I'm using PA-5050s and the virt-wire connection is configured on eth1/3 and eth1/4.&nbsp; PANOS version is 4.0.4.</P></BODY></HTML> Fri, 26 Aug 2011 12:09:06 GMT https://live.paloaltonetworks.com/t5/general-topics/respond-to-arp-for-path-monitor-ip-in-virt-wire-mode/m-p/39234#M28782 Mack 2011-08-26T12:09:06Z