topic Re: Scansafe to PANDB URL Category Mapping in General Topics

Scansafe to PANDB URL Category Mapping

sdw — Wed, 01 Oct 2014 10:50:28 GMT

Hi All,

I'm searching for the mapping between Scansafe and PANDB URL categories.

Scansafe categories to be found here:

Web Filtering Categories - Cisco

Thanks for any input you can provide.

Stijn

Re: Scansafe to PANDB URL Category Mapping

Jacobwebb — Wed, 01 Oct 2014 11:25:38 GMT

Hi Stijn,

I am unaware of any documentation for mapping Scansafe categories to PAN-DB. You can find a list of categories that are included in PAN-DB and their descriptions at Palo Alto Networks URL Filtering - Category List. You might find BrightCloud to PAN-DB Category Mapping useful if you can find a Scansafe to Brightcloud mappings you could then use this document to better map to PAN-DB.

Regards,

Jacob Webb

Re: Scansafe to PANDB URL Category Mapping

hshah — Wed, 01 Oct 2014 13:30:44 GMT

Hello SDW,

There is no document for scanesafe to PANDB/Brightcloud mapping.

PANW does not support scansafe, so thats the reason there is no document.

However, try to contact your SE, they are good with deployments. They might have something.

Regards,

Hardik Shah

Re: Scansafe to PANDB URL Category Mapping

mmmccorkle — Fri, 03 Oct 2014 17:40:15 GMT

Indeed, I also did not find any documentation linking the two together.

not entirely related, but the other option for URL filtering on our appliance is to use BrightCloud.

Thanks!

Re: Scansafe to PANDB URL Category Mapping

Jacobwebb — Mon, 03 Nov 2014 12:15:55 GMT

sdw

Stijn,

Please take a look at ScanSafe to PAN-DB URL Category Mapping . This document should help.

- Jacob

Re: Scansafe to PANDB URL Category Mapping

HULK — Mon, 03 Nov 2014 12:51:53 GMT

Hello Sdw,

The above mentioned KB document will give you most of the category mapping between ScanSafe vs PAN-DB (ScanSafe to PAN-DB URL Category Mapping) . You may also verify any unknown URL categorization here Palo Alto Networks URL Filtering - Test A Site

Hope this helps.

Thanks