topic Re: Upgrading to Pan OS 5.0.4 Error in General Topics

Upgrading to Pan OS 5.0.4 Error

mmxong — Sun, 28 Apr 2013 04:05:43 GMT

Hi All,

I just attempted to upgrade my existing pan os 4.1.2 to Pan 5.0.4. Everything went fine but my main link to router was down and so there is no internet access. I restarted the router and it was still no link. So i downgraded back to 4.1.2 and the link was back as normal. Anyone got this issue ?

Thanks

Ben

Re: Upgrading to Pan OS 5.0.4 Error

cmateam — Mon, 29 Apr 2013 22:06:43 GMT

I had a similar problem where the WAN link was set to a fixed setting 100/Full/Up and upon upgrade it failed to come up when I failed to that firewall to upgrade the other. I ended up changing it's settings and committing the change which brought the link back up. I then changed it back to the original setting. I upgraded from 4.1.9 to 5.0.4.

Re: Upgrading to Pan OS 5.0.4 Error

mmxong — Tue, 30 Apr 2013 01:31:49 GMT

Hi,

My original setting was at 100/full/auto. In your case what did you change the settings to enable to successful wan link before reverting back to the original ?

Thanks

Ben

Re: Upgrading to Pan OS 5.0.4 Error

cmateam — Tue, 30 Apr 2013 22:07:52 GMT

Ben,

I had mine on 100/full/auto and changed it to auto/auto/auto committed it, and then changed it back to 100/full/up (auto probably would work too). I bet just changing it from auto to up and committing it would work. I did this on the FW and not the router.