topic Re: 10G link aggregation PA-5050 to Juniper EX4500 switches in General Topics

10G link aggregation PA-5050 to Juniper EX4500 switches

Mack — Fri, 22 Nov 2013 15:58:52 GMT

Hi everyone,

I'm having a bit of trouble configuring link aggregation between my PA-5050 and Juniper EX4500 switches over 10G interfaces. The problem seems to stem from the fact that the PA-5050 link-aggregation dialog gives two options for link speed: 1000 or Auto, whereas the EX4500 configuration requires a hardcoded 10G speed setting.

How can I tell the PA-5050 to use a speed of 10000 instead of Auto?

Re: 10G link aggregation PA-5050 to Juniper EX4500 switches

Phoenix — Fri, 22 Nov 2013 16:15:21 GMT

Hello Mack,

Can you try the below command and see how it works for you,

configure

set network interface ethernet ethernet1/x link-speed 10000

commit

Thanks

Re: 10G link aggregation PA-5050 to Juniper EX4500 switches

kadak — Fri, 22 Nov 2013 16:15:21 GMT

Hello Mack,

According to the following document, its by design that we have to set the speed to Auto for 10G interfaces:

No 10gb (10000) Speed Option in GUI

Hope that helps!

Thanks and regards,

Kunal Adak

Re: 10G link aggregation PA-5050 to Juniper EX4500 switches

Phoenix — Fri, 22 Nov 2013 16:21:16 GMT

Hello Mack,

To add more to better understand on capability, pls refer the below doc.

Commit Error: Invalid Forced Speed/Duplex for Ethernet1/x

Thanks