topic Re: PA-200 Initial Configuration from console only in General Topics

PA-200 Initial Configuration from console only

niuk — Sat, 06 Dec 2014 18:28:42 GMT

Trying initial setup of PA-200 using console connection (public on ethernet 1/1, no mgmt connected). I know I have to remove virtual wire, but having validation error below. Any suggestions ?

delete network interface ethernet 1/1 virtual-wire

delete network interface ethernet 1/2 virtual-wire

delete network virtual-wire default-vwire

delete network interface ethernet 1/1 virtual-wire units 1/1

Validation Error:

zone -> untrust -> network -> virtual-wire 'ethernet1/1' is not a valid reference

zone -> untrust -> network -> virtual-wire is invalid

This operation invalidates configuration for devices -> localhost.localdomain -> vsys -> vsys1 -> zone -> untrust

Re: PA-200 Initial Configuration from console only

Retired Member — Sat, 06 Dec 2014 20:27:57 GMT

hi,

you have to delete the zones also

Re: PA-200 Initial Configuration from console only

niuk — Sat, 06 Dec 2014 20:48:22 GMT

It worked after I deleted zones and rule1

delete zone untrust network virtual-wire

delete zone trust network virtual-wire

delete rulebase security rules rule1