No IP addresses on HA interfaces

GV27 — Mon, 14 May 2012 17:18:34 GMT

Hi all,

I'm working for a new company building out several new data centers. They got a jump on getting things up and running before hiring their own resource and had a consultant setup a couple of pairs of PA-2050s. They are active/passive. The consultant set up the HA interfaces with no IP addresses. Is this an OK configuration? They seem happy, but every guide I've looked at - and the training I attended - all show addresses on the interfaces. Are there any drawbacks to not having addresses on the interfaces?

Thanks,

Chris

Re: No IP addresses on HA interfaces

mikand — Tue, 15 May 2012 06:33:42 GMT

I guess it should work if the boxes are directly connected to each other (only using a single tp-cable for each HA interface).

However I cant find anything about that this would be optional according to the PA-4.1_Administrators_Guide.pdf

It rather states that (in HA settings):

* Peer HA IP Address—Enter the IP address of the HA1 interface that is specified
in the Control Link section of the other firewall.

* Backup Peer HA IP Address—Enter the IP address of a backup peer HA firewall.
Enter the IP address for the peer’s backup control link.

But at the same time the screenshot at page 70 shows 2 HA-interfaces configured at dataplane without ip addresses set (at least not shown in the GUI which the screenshot displays).

topic Re: No IP addresses on HA interfaces in General Topics

No IP addresses on HA interfaces

Re: No IP addresses on HA interfaces