topic Re: PA-7050 HSCI Ports in General Topics

PA-7050 HSCI Ports

gafrol — Thu, 19 Jun 2014 10:00:37 GMT

I am in the process of a cluster (active/passive) design for two PA-7050 chassis. We have two Datacenters in two different locations. The DC's are connected through a Layer 2 connection.

Can I use the HA-2 QSFP+ Interfaces on the SMC to interconnect the two Chassis ?

Cheers

Roland

Re: PA-7050 HSCI Ports

jbadal — Fri, 05 Sep 2014 20:02:31 GMT

HA-2 QSFP links on the 7050s must be directly connected

Re: PA-7050 HSCI Ports

hshah — Fri, 05 Sep 2014 23:32:52 GMT

Hi Gafrol,

HSCI has to be connected directly, it doesnt support L2 or L3.

PA-7050 Hardware Reference Guide (English)

Refer 15th page of above document.

Its used for Hardware Redundancy and can be used for HA2 and HA3 interfaces.

Regards,

Hardik Shah

Re: PA-7050 HSCI Ports

jsu2 — Wed, 20 Jan 2016 21:11:04 GMT

Does PA support connecting HSCI via dedicated DWDM, and can the HSCI ports be stepped down to 10G? Or, does the cluster pair have to be close enough to be connected with a single physical interconnect in 40G only?

If the HSCI cannot be used for HA2, what performance hit will be experienced by moving HA2 to regular SFP ports on the NPC rather than offloading it onto the HSCI ports on the SMC?

Re: PA-7050 HSCI Ports

DanieldKim — Tue, 12 Jul 2016 20:11:21 GMT

what type of connector is used on the fiber cables for the QFSP port? M or F MPO type.