high dataplane cpu

PanIst — Fri, 12 Jun 2015 19:18:54 GMT

Hi,

we're having an issue with 3050 very high cpu.new installed device and when checking dp file we see that ,

anyone can tell what can be cause this ? probably ? Thanks.

panos 6.1.4

packet buffer is not high,

packet descriptor is not high

session count is normal

throughput is normal

packet rate is between 80000-100000 at problem time.

Resource monitoring sampling data (per second):

:CPU load sampling by group:

:flow_lookup : 97%

:flow_fastpath : 90%

:flow_slowpath : 97%

:flow_forwarding : 97%

:flow_mgmt : 60%

:flow_ctrl : 60%

:nac_result : 97%

:flow_np : 90%

:dfa_result : 97%

:module_internal : 97%

:aho_result : 97%

:zip_result : 97%

:pktlog_forwarding : 98%

:lwm : 0%

:flow_host : 60%

:CPU load (%) during last 15 seconds:

:core 0 1 2 3 4 5

: 0 60 97 97 98 98

: 0 59 97 97 97 97

: 0 59 98 98 98 98

: 0 56 97 97 98 98

: 0 57 98 98 98 98

: 0 59 97 97 97 97

: 0 57 94 94 95 95

: 0 56 95 95 96 96

: 0 53 95 96 96 96

: 0 49 93 93 94 94

: 0 50 94 94 95 95

: 0 52 95 95 95 95

: 0 61 96 96 96 96

: 0 64 98 98 98 98

:Resource utilization (%) during last 15 seconds:

:session:

: 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19

:packet buffer:

: 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0

:packet descriptor:

: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

:packet descriptor (on-chip):

: 7 6 3 3 4 4 4 4 3 5 4 3 3 5 6

:Resource monitoring statistics (per minute):

:CPU load (%) during last 15 minutes:

:core 0 1 2 3 4 5

: avg max avg max avg max avg max avg max avg max

: 0 0 53 60 95 99 95 99 96 99 96 99

: 0 0 55 66 96 100 96 100 96 100 96 100

: 0 0 55 66 95 100 95 100 96 100 96 100

: 0 0 58 69 97 100 97 100 97 100 97 100

: 0 0 57 65 97 100 97 100 97 100 97 100

: 0 0 59 69 99 100 99 100 99 100 99 100

: 0 0 59 73 97 100 97 100 97 100 97 100

: 0 0 57 65 98 100 98 100 98 100 98 100

: 0 0 54 66 97 100 97 100 97 100 97 100

: 0 0 55 67 97 100 97 100 97 100 97 100

: 0 0 53 63 96 100 96 100 96 100 97 100

: 0 0 52 58 96 99 96 99 96 99 96 100

: 0 0 46 57 93 99 93 99 93 99 93 99

: 0 0 47 62 92 98 92 98 93 98 93 98

: 0 0 55 70 95 99 95 99 95 99 95 99

:Resource utilization (%) during last 15 minutes:

:session (average):

: 19 21 19 20 20 20 21 20 20 19 20 19 18 19 18

:session (maximum):

: 20 22 20 21 20 21 22 22 20 20 21 20 19 19 19

:packet buffer (average):

: 0 0 0 1 0 1 1 1 0 0 0 0 0 0 0

:packet buffer (maximum):

: 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1

:packet descriptor (average):

: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

:packet descriptor (maximum):

: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

:packet descriptor (on-chip) (average):

: 4 5 4 6 4 6 6 6 4 5 4 4 3 5 5

:packet descriptor (on-chip) (maximum):

: 8 24 9 22 7 20 14 18 11 17 10 8 8 31 28

:--------------------------------------------------------------------------------

:Number of sessions supported: 524286

:Number of active sessions: 103036

:Number of active TCP sessions: 52227

:Number of active UDP sessions: 45340

:Number of active ICMP sessions: 89

:Number of active BCAST sessions: 0

:Number of active MCAST sessions: 0

:Number of active predict sessions: 1981

:Session table utilization: 19%

:Number of sessions created since bootup: 24249791

:Packet rate: 95996/s

:Throughput: 574825 kbps

:New connection establish rate: 2316 cps

:--------------------------------------------------------------------------------

:Session timeout

: TCP default timeout: 3600 secs

: TCP session timeout before SYN-ACK received: 5 secs

: TCP session timeout before 3-way handshaking: 10 secs

: TCP half-closed session timeout: 120 secs

: TCP session timeout in TIME_WAIT: 15 secs

: TCP session timeout for unverified RST: 30 secs

: UDP default timeout: 30 secs

: ICMP default timeout: 6 secs

: other IP default timeout: 30 secs

: Captive Portal session timeout: 30 secs

: Session timeout in discard state:

: TCP: 90 secs, UDP: 60 secs, other IP protocols: 60 secs

:--------------------------------------------------------------------------------

:Session accelerated aging: True

: Accelerated aging threshold: 80% of utilization

: Scaling factor: 2 X

:--------------------------------------------------------------------------------

:Session setup

: TCP - reject non-SYN first packet: True

: Hardware session offloading: True

: IPv6 firewalling: True

: Strict TCP/IP checksum: True

:--------------------------------------------------------------------------------

:Application trickling scan parameters:

: Timeout to determine application trickling: 10 secs

: Resource utilization threshold to start scan: 80%

: Scan scaling factor over regular aging: 8

:--------------------------------------------------------------------------------

:Session behavior when resource limit is reached: drop

:--------------------------------------------------------------------------------

:Pcap token bucket rate : 10485760

:--------------------------------------------------------------------------------

Re: high dataplane cpu

nextgenhappines — Fri, 12 Jun 2015 22:18:07 GMT

It looks like you have about 1900 plus predicted sessions, take a look on those,

show session all filter type predict

Also, run ACC report for the last 15 mins or the time period that when the dp is high.

topic Re: high dataplane cpu in General Topics

high dataplane cpu

Re: high dataplane cpu