topic How to create an IPSec Tunnel between 2 dynamic locations in General Topics https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49128#M36193 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I was looking for some documentation on creating IPSect tunnel between 2 devices that have Dynamic WAN interfaces.&nbsp; Is this possible between PA2020's</P><P></P><P>thanks</P></BODY></HTML> Tue, 27 Nov 2012 19:31:27 GMT ntelfer 2012-11-27T19:31:27Z How to create an IPSec Tunnel between 2 dynamic locations https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49128#M36193 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I was looking for some documentation on creating IPSect tunnel between 2 devices that have Dynamic WAN interfaces.&nbsp; Is this possible between PA2020's</P><P></P><P>thanks</P></BODY></HTML> Tue, 27 Nov 2012 19:31:27 GMT https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49128#M36193 ntelfer 2012-11-27T19:31:27Z Re: How to create an IPSec Tunnel between 2 dynamic locations https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49129#M36194 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I don't think it's possible because DynDNS is not not supported on Palo alto (correct me if I'm wrong !).</P><P>With Dyndns, each firewall could find the remote IP address of the other fiirewall to establish the tunnel.</P><P>On site must have a fix IP...</P><P></P><P>Regards,</P><P></P><P>HA</P></BODY></HTML> Tue, 27 Nov 2012 21:57:36 GMT https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49129#M36194 licenselu 2012-11-27T21:57:36Z Re: How to create an IPSec Tunnel between 2 dynamic locations https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49130#M36195 <HTML><HEAD></HEAD><BODY><P>HA is correct, both sides cannot be dynamic, only one.</P></BODY></HTML> Thu, 29 Nov 2012 21:14:59 GMT https://live.paloaltonetworks.com/t5/general-topics/how-to-create-an-ipsec-tunnel-between-2-dynamic-locations/m-p/49130#M36195 bvandivier 2012-11-29T21:14:59Z