topic vsys -> vsys1 constraints failed : Maximum number of virtual systems reached in General Topics

vsys -> vsys1 constraints failed : Maximum number of virtual systems reached

Fondation_EPF — Fri, 30 Mar 2012 13:23:44 GMT

Hi,

After cloning a rule i had this answer if i try to commit

"vsys -> vsys1 constraints failed : Maximum number of virtual systems reached"

Does someone knows what it means and what i can do?

Thanks

Frederic

Re: vsys -> vsys1 constraints failed : Maximum number of virtual systems reached

mikand — Fri, 30 Mar 2012 19:34:37 GMT

Do you have vsys enabled and are you expecting to run vsys?

Re: vsys -> vsys1 constraints failed : Maximum number of virtual systems reached

Fondation_EPF — Sat, 31 Mar 2012 13:22:35 GMT

Hi,

I haven't modify anything,

the only thing I made after the last working commit was cloning a rule...

To get things running back I used the passive PA2050, deleted the cloned rule, cloned the rule again, modified it and commited it...

Once the configuration was updare on the active system, everything worked well...

Frédéric Besse

PA2050 active/passive mode, 4.1.4 version

Re: vsys -> vsys1 constraints failed : Maximum number of virtual systems reached

jseals — Sat, 31 Mar 2012 19:48:34 GMT

Hi Frédéric,

I see some similar cases to the behavior you're describing. I'm glad to see you were able to work around the issue. It looks like you should also be able to revert the config, and do a commit force from the cli to get around this error.

This seems like more of a work-around though. If you run into the issue again, it may be wise to open a case and see if we can debug the issue to find a root cause.

Thanks,

Jason Seals