topic Re: VWire in General Topics

VWire

AymanShimy — Sun, 26 Jan 2014 13:31:36 GMT

Hello i have the below design

Internet Cloud ------------------> Cisco ASA -------VWire1----------->PA----------VWire1---------->Core Switch

PA ----------------------->SWitch----------------------- >WAN Router

PA ------------------------>other WAN Router

------------------------>DMZ

in this scenario i will configure VWire1 from ASA and Core and VWire 2 from PA to Switch and from PA to WAN Router, VWire 3 from PA to Switch and from PA to other WAN Router and configure destination NATing.

till now i don't try this scenario in LAB i don't know is it consider best parctice or better if i use L3 from PA to switch ( WAN VLAN , other WAN VLAN).

and if i use V Router i can use only one VRouter or 3 VRouters.

Re: VWire

Retired Member — Sun, 26 Jan 2014 18:47:52 GMT

if you will not use vpn functions vwire is Ok.

will you remove cisco or it will stay ?

Re: VWire

VinceM — Mon, 27 Jan 2014 08:49:21 GMT

Hi,

Just keep i mind that Vwire not support VPN, routing or device management on vwire interface.

If it's ok for you .... please go.

By default, allow all Vlan and be transparent to multicast.

Hope help.