topic About Link Aggregation in General Topics

About Link Aggregation

ttongfly — Wed, 08 Jun 2011 00:48:28 GMT

Hello guys.

I tested about link aggregation for PA4060 that connected CISCO SW. but PA only connected "channel-group mode on" that mean disabled PAgP en LACP only with Cisco SW.

I think PA should connected other devices using LACP (802.3ad) but result was not.

So I want to know that configuration of guideline for link aggregation of PA.

Thanks.

Regards.

Roh.

Re: About Link Aggregation

gsamuels — Thu, 09 Jun 2011 01:41:19 GMT

The PAN will not support additional protocols PAgP,

I have confirmed we support the standard for link aggregation (802.3ad), this should work.

Re: About Link Aggregation

dagibbs — Thu, 09 Jun 2011 06:28:39 GMT

ttongfly wrote:

Hello guys.

I tested about link aggregation for PA4060 that connected CISCO SW. but PA only connected "channel-group mode on" that mean disabled PAgP en LACP only with Cisco SW.

I think PA should connected other devices using LACP (802.3ad) but result was not.

So I want to know that configuration of guideline for link aggregation of PA.

Thanks.

Regards.

Roh.

Try using the "channel group X mode active" command on your Cisco device.

I've found Cisco devices work best with other vendor devices when *both* sets of devices are in active mode (I.E. no passive LACP ports).

Cheers

Re: About Link Aggregation

James — Thu, 09 Jun 2011 08:51:10 GMT

This will help:

https://live.paloaltonetworks.com/message/6449#6449

Thanks

James

Re: About Link Aggregation

ttongfly — Tue, 14 Jun 2011 00:46:12 GMT

Hi guys

Thanks you! I will test again soon!