topic Re: Is it possible use two or more snmp communities in the same firewall with version 6.1.0? in General Topics

Is it possible use two or more snmp communities in the same firewall with version 6.1.0?

francisco_dexperts — Tue, 06 Oct 2015 00:50:47 GMT

Hi all

I`m not sure if it is possible use two or more communities in the same box, I tried in a lab but doesn´t works. I used snmp-setup in Device->sETUP->Operations but only can use one snmp string

Re: Is it possible use two or more snmp communities in the same firewall with version 6.1.0?

reaper — Tue, 06 Oct 2015 08:32:12 GMT

Hi Francisco

only 1 SNMP v2c community string can be applied per device

you could enable SNMP v3 which allows you to control which SNMP manager gets access to which OID

regards

Tom

Re: Is it possible use two or more snmp communities in the same firewall with version 6.1.0?

pankaku — Tue, 06 Oct 2015 08:35:01 GMT

Device>Setup> Operations

We can configure only one community string. Also we can configure either SNMPv2 or SNMPV3 only one at a time.

Device>Server Profiles> SNMP Trap

For SNMP traps you can configure multiple SNMP servers but in one security policies only one can be used.