topic Re: Command Line : [show ntp] in M-100 result : op command for client dagger timed out in General Topics

Command Line : [show ntp] in M-100 result : op command for client dagger timed out

John_Lee — Sun, 15 Nov 2015 04:19:31 GMT

Hello,

The M-100 is running on OS 6.0.9
I did command via ssh
show ntp

Server error : op command for client dagger timed out
that is why management resource is consuming...

I can't beleive that as time went by,, I have seen that result continusly
continuing when I did command until now

show clock is working properly

and I did command as 'debug software restart ntp'..

same problem

Re: Command Line : [show ntp] in M-100 result : op command for client dagger timed out

kiwi — Mon, 16 Nov 2015 14:05:32 GMT

We have seen a similar issue in the past which has since been addressed. Would you consider upgrading to a more recent PAN-OS version (for example 6.1.7 or 7.0.3) which are likely to address this. Notice there are quite a few addressed NTP issues in the release notes of both these PAN-OS versions.

Alternatively TAC should be able to confirm if you are hitting the same issue or if this is something else.

Hope this helps,

-Kim.