topic Re: Configuration Migration between same series appliances in General Topics

Configuration Migration between same series appliances

Neosecure — Mon, 07 Dec 2015 22:17:47 GMT

Hello PAN Community.

I would like to read your opinions/comments about the following situation: we currently have a HA Scenario deployed in production with 2 PA-3050 in active-pasive mode, both of them with PAN-0S 6.0.4. We plan to replace the scenario with PA-3020 appliances and both of them with PAN-OS 6.0.6 installed.

How should we proceed? Is there any consideration we must keep in mind to successfully migrate the whole configuration to these new hardwares?

Thanks and regards

Re: Configuration Migration between same series appliances

pankaku — Mon, 07 Dec 2015 22:45:34 GMT

Just take care of the multivsys related configuration if you have used multivsys configuration else everything should go smoothly. Export from 3050 and import to 3020

Re: Configuration Migration between same series appliances

Kalemegdan — Mon, 07 Dec 2015 23:01:54 GMT

Sync config on 3050s; bring up a HA pair of 3020s, install PAN-OS 6.0.4 on 3020s; import config from 3050 to 3020; sysn config; check config for errros (compare 3020 with 3025), if all OK, upgrade 3020 to 6.0.6.

Re: Configuration Migration between same series appliances

pankaku — Tue, 08 Dec 2015 00:04:26 GMT

Another thing will be upgrade the 3050 first test the config if everything is working then you can do the migration.

Re: Configuration Migration between same series appliances

Neosecure — Wed, 09 Dec 2015 19:04:02 GMT

So it will work if we export/import from 6.0.4 to 6.0.6?