topic Get information on Security Profiles our of PANOS? in General Topics

Get information on Security Profiles our of PANOS?

RSKadish — Mon, 22 Feb 2016 15:10:43 GMT

Hi all,

My team is currently undergoing an audit and one of the requests is for the configuration of the security profiles, including URL filtering, from our firewalls. As we are fairly new to PANOS this has not been requested before. I don't see anything in the CLI reference guide for PANOS 6.3.1, our current version, that would give me this information. I also don't see any way to get the output cleanly from the Web GUI.

I suspect if I have our admins run "show config" in the CLI that the information is in there, but I'm looking for something more targeted.

Any suggestions?

TIA!

- Steve

Re: Get information on Security Profiles our of PANOS?

Raido_Rattameister — Mon, 22 Feb 2016 15:39:41 GMT

To see what profiles are attached start with commands below.

> set cli config-output-format set
> configure
# show rulebase security | match profile-setting

Re: Get information on Security Profiles our of PANOS?

RSKadish — Mon, 22 Feb 2016 15:47:07 GMT

Hi Raido,

Thanks for the help! By any chance is this a version 7 CLI command? We are on version 6.1,9, and I don't see it in the reference guide for that version.

Best,

- Steve

Re: Get information on Security Profiles our of PANOS?

Raido_Rattameister — Mon, 22 Feb 2016 16:08:02 GMT

I tested it on 7.0.4 and 6.1.4

Works on both.

Re: Get information on Security Profiles our of PANOS?

RSKadish — Mon, 22 Feb 2016 16:36:18 GMT

Fantastic. I appreciate the help!

- Steve