Manage users connected to wire from layer 3

Angel_WestconMexico — Tue, 14 Jun 2016 16:36:14 GMT

Hello i need for you help.

The client has device connected in virtual wire mode and wants to configure another interface on the device that will connect to your LAN where their servers are and can see users who connect to the virtual wire mode.

The virtual network wire is connected only to mobile users ..
Since the other network want to manage such mobile users, create policies, security rules etc. Is this possible..

Thanks for your help

Re: Manage users connected to wire from layer 3

rmonvon — Tue, 14 Jun 2016 17:23:24 GMT

Hi...If I understand you correctly, the server LAN will connect to a layer3 Eth port of the PA. The mobile users are crossing the vwire of the PA to reach the server LAN. Several options are available and it boils down to having 2 layer3 interfaces to route traffic from users to servers. You can create 2 L3 sub-interfaces on the layer3 port and police traffic between the 2 sub-interfaces (i.e. 1 sub-int for users & 1 sub-int for servers). Or define 2 physical L3 Eth ports to control traffic between them. You wouldn't need the virtual wire anymore. Thanks.

topic Manage users connected to wire from layer 3 in General Topics

Manage users connected to wire from layer 3

Re: Manage users connected to wire from layer 3