topic Re: Agg Interface Subinterfaces over multiple vsys in General Topics

Agg Interface Subinterfaces over multiple vsys

Sly_Cooper — Wed, 29 Jun 2016 21:23:26 GMT

Hi,

I am working on multi-vsys (4) design with PA-7050 chassis. I would like to know if I can use aggregate interface over multiple vsys. I am thinking of using aggregate interface so that i can get link redundancy. The agg interface will have multiple sub-interfaces part of different vsys. Is it possible?

Re: Agg Interface Subinterfaces over multiple vsys

pankaku — Thu, 30 Jun 2016 00:16:00 GMT

Yes it is possible check the screenshot. Test in 5k series box

Re: Agg Interface Subinterfaces over multiple vsys

Sly_Cooper — Thu, 07 Jul 2016 14:55:12 GMT

@pankaku - do you have multi-vsys enabled? I also checked it on PA-7050 but the default config too has a vsys associated for an interface. I was managed to get the sub-interfaces attached to different vsys however I could not get the base single/agg configured with no vsys. How did you do that?

Re: Agg Interface Subinterfaces over multiple vsys

pankaku — Thu, 07 Jul 2016 16:17:21 GMT

Yes you can see the screenshot it is test on 5060 box.

Re: Agg Interface Subinterfaces over multiple vsys

Sly_Cooper — Thu, 07 Jul 2016 18:13:32 GMT

@pankaku Can you please hit Edit for the interface and check the settings? Do you see no vsys under Agg interface? Here is what I see. Though the interface screen shows none for vsys, if you edit the interface it has vsys associated.