topic How to change settings in default rules. in General Topics

How to change settings in default rules.

yadsingh — Tue, 30 Aug 2016 14:27:24 GMT

Hi Guys,

I see two rules from 6.1 which are Interzone deny and Intrazone allow. Do we log those rules ?

If yes is there a way to change settings those are always greyed out.

Re: How to change settings in default rules.

BPry — Tue, 30 Aug 2016 15:33:48 GMT

Pre 7.0: You need to create identical rules in your security policy list and set them up how you like them; they will then hit that rule and process as you have requested.

Post 7.0: Click on the rule and select 'Override' towards the bottom of the page and you can setup whatever action and logging that you want; however you will still be unable to change anything else on these rules, just the action and logging options.

Re: How to change settings in default rules.

yadsingh — Tue, 30 Aug 2016 23:15:54 GMT

what is deafult action on log. Do they log by default.

Re: How to change settings in default rules.

kiwi — Wed, 31 Aug 2016 08:40:14 GMT

Default action in the default rules is not to log.

You can easily verify this by using the override function... this allows you to enable the log options that are not checked by default.

Cheers,

-Kim.