topic Apply QoS for uploading in General Topics

Apply QoS for uploading

sib2017 — Wed, 28 Sep 2016 03:55:25 GMT

Hi,

I have the scenario , user wants upload or stream to outside the campus.

Pa in virtual wire mode and after pa there is ASA firewall ,

How can I makesure the streaming or uploading is not interuptted by other traffic

Thanks

Re: Apply QoS for uploading

reaper — Wed, 28 Sep 2016 08:06:30 GMT

Hi!

have you checked out this article already? Getting Started: Quality of Service

If you want to make sure the outbound traffic has a bandwidth guarantee, you'll need to create a QoS profile with one class that has a bandwidth guarantee set to it. you will want to attach that profile to your external interface (QoS is applied on the _egress_ interface of the flow) and create a QoS policy to identify this user's outbound stream to that class

Tom

Re: Apply QoS for uploading

pankaku — Wed, 28 Sep 2016 16:10:14 GMT

Please check the doc it will be helpful:

https://live.paloaltonetworks.com/t5/Configuration-Articles/Apply-QoS-for-Youtube-and-streaming-media/ta-p/66036

Re: Apply QoS for uploading

sib2017 — Tue, 18 Oct 2016 18:39:22 GMT

Hi,

From qos policy , how palo alto differentiate between policy for uploading and downloading ?

for example an ip 192.168.1.100 is streaming an av ,the source must be 192.168.1.100 and if class 3 and we have same class 3

on downloading

Thanks

Re: Apply QoS for uploading

BPry — Tue, 18 Oct 2016 18:43:02 GMT

The different egress zones. The download policy would be the QoS on the trust interface, where the upload policy would be the Qos Policy on the UnTrust interface. Therefore the traffic passing through the same class doesn't really matter, since uploading and downloading is never done through the same egress zone.

Re: Apply QoS for uploading

sib2017 — Wed, 19 Oct 2016 05:43:00 GMT

Hi,

So the rule look like the below ?

Thanks

Re: Apply QoS for uploading

sib2017 — Wed, 19 Oct 2016 05:46:27 GMT

Hi,

For example if the topology like below , Is it enough to mark the qos only on PA or does it required to mark on other routers ,switch and asa( nating happening here) .

PA Is in vwire mode

topology

Thanks