How to approve that PaloAlto is sending Netflow

Nessrina — Thu, 27 Oct 2016 10:46:49 GMT

Hi, Please I need Help !!

I have installed Netflow integrator to collect netflow data from PaloAlto firewall.I have configured PaloAlto to send netflow data to the server Netflow Integrator.But there is no data is receiving .

How can I know that paloalto is sending netflow.Is there a solution that help me to verify ?

Thanks in advance.

Best Regards.

Re: How to approve that PaloAlto is sending Netflow

kiwi — Thu, 27 Oct 2016 11:31:54 GMT

Hi,

By default netflow will use the management port (if you have no service route configured for Netflow service).

Via the CLI you can do the following to capture traffic from your mgmt-port to your Netflow server IP address :

> tcpdump filter "host <IP>"

Let it run the time you have configured your Refresh rate in your netflow server profile.

Press Ctrl-C to stop the capture and use the following command to check your tcpdump content :

> view-pcap mgmt-pcap mgmt.pcap

You also might want to verify if there are actual netflow records :

> debug log-receiver netflow statistics

And it might seem silly, but you did apply the netflow profile to an interface right ?

Hope it helps,

-Kim.

topic Re: How to approve that PaloAlto is sending Netflow in General Topics

How to approve that PaloAlto is sending Netflow

Re: How to approve that PaloAlto is sending Netflow