topic Re: Can't do a commit ! Auto-commit failing in General Topics

Can't do a commit ! Auto-commit failing

JensWilladsen — Fri, 28 Oct 2016 08:42:10 GMT

Have got a Pa-3020 Demo box to use for a POC, but I cant commit anything as "commit operation aborted as auto-commit not done yet"

In the Task view several auto-commit antries are failed.

Any one has any suggestions ??

Best Regards Jens W

Re: Can't do a commit ! Auto-commit failing

kiwi — Fri, 28 Oct 2016 09:03:23 GMT

Hi @JensWilladsen,

Autocommit failures can have many reasons.

Can you check the autocommit job details and verify exactly why they are failing ?

Cheers !

-Kim.

Re: Can't do a commit ! Auto-commit failing

JensWilladsen — Fri, 28 Oct 2016 09:07:48 GMT

Hi @kiwi

The task view looks like this:

Regards Jens

Re: Can't do a commit ! Auto-commit failing

kiwi — Fri, 28 Oct 2016 09:38:17 GMT

Hi @JensWilladsen,

The Threat database handler is a 'known' commit failure.

In most cases a corrupt AV signature database or Content database will cause these type of auto commit failures. AV update process or Content update process might have been terminated abruptly without any indication to the user leaving the AV signature database corrupt or Content database corrupt.

Usually a manual Anti-Virus install from the CLI will serve as a workaround for this issue. Download the Anti-Virus file manually from https://support.paloaltonetworks.com and upload the same to the firewall. After the upload, use the following command to do the manaul AV install from the CLI.

> request anti-virus upgrade install file

If the manual install workaround fails for some reason, then another workaround for this issue is described below:

Remove the contents of the following folders (root access might be required ... contact Support for this):
/opt/pancfg/mgmt/updates/curav/
/opt/pancfg/mgmt/updates/oldav/
Remove only the contents of the folder and leave the folders intact.
Restart the device server process.
Do a commit force.

Below are some articles and discussions that discuss this behaviour and offer possible workaround/solution :

Threat Database Handler Failed Commit Error

Error Threat database handler failed Module device

Cheers !

-Kim.

Re: Can't do a commit ! Auto-commit failing

JensWilladsen — Fri, 28 Oct 2016 09:36:21 GMT

@kiwi Thx i will try that!

Regards Jens