https://live.paloaltonetworks.com/t5/general-topics/crossover-cables-on-pa-7050/m-p/124111#M46276 <P>It's always&nbsp;<STRONG>Best</STRONG> to follow what is recommended for the devices; however most common devices have the smarts to notice if you are using a crossover or a striaght thru and work accordingly. If you have tested your HA links and they are working I wouldn't worry to much about it.&nbsp;</P> Fri, 04 Nov 2016 14:29:46 GMT BPry 2016-11-04T14:29:46Z https://live.paloaltonetworks.com/t5/general-topics/crossover-cables-on-pa-7050/m-p/124090#M46274 <P>Hello,</P><P>&nbsp;</P><P>I found that for HA1 when there are directly connected, Palo Alto recoments to have them interconected with crossover cables.</P><P>is this the same with PA-7050?</P><P><A href="https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/high-availability/configure-active-passive-ha" target="_blank">https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/high-availability/configure-active-passive-ha</A></P><P>&nbsp;</P><P>because at this point it's working with straight thru cables.</P><P>&nbsp;</P><P>Could you please advise?</P><P>&nbsp;</P><P>Thank you</P> Fri, 04 Nov 2016 14:09:51 GMT https://live.paloaltonetworks.com/t5/general-topics/crossover-cables-on-pa-7050/m-p/124090#M46274 Kaliman 2016-11-04T14:09:51Z https://live.paloaltonetworks.com/t5/general-topics/crossover-cables-on-pa-7050/m-p/124111#M46276 <P>It's always&nbsp;<STRONG>Best</STRONG> to follow what is recommended for the devices; however most common devices have the smarts to notice if you are using a crossover or a striaght thru and work accordingly. If you have tested your HA links and they are working I wouldn't worry to much about it.&nbsp;</P> Fri, 04 Nov 2016 14:29:46 GMT https://live.paloaltonetworks.com/t5/general-topics/crossover-cables-on-pa-7050/m-p/124111#M46276 BPry 2016-11-04T14:29:46Z