Multiple VLANs through Network Interface

JohnCSteamer — Fri, 16 Dec 2016 16:34:46 GMT

Hopefully this is a very simple question, but I wanted to make sure I was actually researching the correct thing.

I am planning on connecting a hypervisor (Hyper-V 2012), directly to one of my Network Interfaces on my PA. The hypervisor has multiple VLANs, and I need them all to go through the PA. I incorrectly thought if I just set the VLAN/Virtual Wire to "none" that it would just allow through whichever VLAN that the hypervisor tagged the traffic as. Am I now correct in thinking that I need to create a Virtual Router that takes in both VLANs? Can anyone point me to some instructions on how to set this up correctly?

Re: Multiple VLANs through Network Interface

TranceforLife — Fri, 16 Dec 2016 17:17:04 GMT

Hi,

So my understanding is that you will have a multiple VMs running on the Hyper-V server on the different VLANs. What you could do is to have a subinterfaces configured on the PA physical interface. VR it is just a routing table attached to the interface.

Check this out:

https://live.paloaltonetworks.com/t5/Featured-Articles/Getting-Started-Layer-3-Subinterfaces/ta-p/67395

https://live.paloaltonetworks.com/twzvq79624/attachments/twzvq79624/documentation_tkb/188/1/Layer2_Networking-PAN-OS-revB.pdf

Thx,

Myky

topic Re: Multiple VLANs through Network Interface in General Topics

Multiple VLANs through Network Interface

Re: Multiple VLANs through Network Interface