topic Troubleshooting commands for Connectivity issue between Panoroma Server and a Firewall in General Topics

Troubleshooting commands for Connectivity issue between Panoroma Server and a Firewall

harshaabba — Tue, 24 Jan 2017 00:07:53 GMT

Hi All,

Panorama server (IP: 10.10.10.5) is not able to manage a firewall that was recently deployed.
which two of the following Toubleshoot commands can be used in CLI of the new firewall ?

A. > test panorama-connect 10.10.10.5
B. > show panorama-status
C. > show arp all | match 10.10.10.5
D. > tcpdump filter “host 10.10.10.5”
E. > debug dataplane packet-diag set capture on

Please advice.

Re: Troubleshooting commands for Connectivity issue between Panoroma Server and a Firewall

TranceforLife — Tue, 24 Jan 2017 07:37:32 GMT

Easy to verify:

> show panorama-status

If it is management interface then tcp dump is a valid command:

https://live.paloaltonetworks.com/t5/Management-Articles/How-To-Packet-Capture-tcpdump-On-Management-Interface/ta-p/55415

> tcpdump filter “host 10.10.10.5”

P.S get VM install and learn that way

Re: Troubleshooting commands for Connectivity issue between Panoroma Server and a Firewall

harshaabba — Tue, 24 Jan 2017 03:03:02 GMT

Thnaks for the reply

@TranceforLife wrote:
Easy to verify:

> show panorama-status

If it is management interface then tcp dump is a valid command:

https://live.paloaltonetworks.com/t5/Management-Articles/How-To-Packet-Capture-tcpdump-On-Management-Interface/ta-p/55415

> tcpdump filter “host 10.10.10.5”