topic PPPoE Interface Settings For PA-220 Eircom in General Topics

PPPoE Interface Settings For PA-220 Eircom

DonohoeRobert — Sun, 07 May 2017 14:18:47 GMT

Hi team,

Just posting this if others setting up PPPoE on new PA-220. There was one or two check boxes to complete so hopefully this saves others some time. The ISP for this one was Eircom, and used default PPPoE settings for that ISP.

ethernet 1/8 tab 1ethernet 1/8 tab 12ethernet 1/8 tab 3

Tab one -

Add a L3 interface, add to a Virtual Router and Zone

Tab - 2

Select PPoE radio button. Enter Default PPoE or other if available. Click advanced

Tab-3

Auth is Auto

Check the box for it to create a default route.

Check the box to say its passive

In the Virtual router the default route points to the PPoE interface and the next address is set to none.

Its the same for the Global Protect Gateways & portal if on the public interface.

Commit the changes and can see it connect from the network>interfaces section or in the system logs.

hope this helps,

Re: PPPoE Interface Settings For PA-220 Eircom

reaper — Mon, 08 May 2017 07:50:11 GMT

Hi @DonohoeRobert

Thanks for the screenshots!

please also feel free to check out this article and tutorial video: Getting Started: Firewall as a PPPoE or DHCP Client

Re: PPPoE Interface Settings For PA-220 Eircom

Retired Member — Fri, 14 Dec 2018 14:31:58 GMT

Rob,

Was this DSL or eirFibre?

Re: PPPoE Interface Settings For PA-220 Eircom

rdonohoe23 — Thu, 07 May 2020 16:11:47 GMT

DSL Dan,

sorry about the delay, was under a different login to the support portal.

hope you and PAN Ireland are well,

Rob