topic Logcard Interface shows unk/unk/down(disabled) in General Topics

Logcard Interface shows unk/unk/down(disabled)

netzwerk-admin — Tue, 05 Sep 2017 11:31:09 GMT

Has anyone out there experienced this?

name id speed/duplex/state mac address
--------------------------------------------------------------------------------
ethernet1/1 64 10000/full/up 58:49:3b:fb:72:40
ethernet1/2 65 10000/full/up 58:49:3b:fb:72:41
ethernet1/3 66 ukn/ukn/down(disabled) b4:0c:25:e0:40:42

We have installed a new Finistar SFP+ (FTLX8574D3BCL), which according to the documentation is compatible with PA-7050.

The IP assigned to the interface cannot be pinged.

What can I do to troubleshoot this phenomene?

Regards,

Jasper Freeman

Re: Logcard Interface shows unk/unk/down(disabled)

reaper — Tue, 05 Sep 2017 12:57:59 GMT

Hi Jasper

it looks like the interface has been set as 'down' manually

make sure the link state is set to auto or up:

Re: Logcard Interface shows unk/unk/down(disabled)

netzwerk-admin — Wed, 13 Sep 2017 08:02:28 GMT

The solution to the problem was:

Check the switch interface on which the logcard is connected.

The on the switch interface was set to 1000 und should be 10000.