topic Remove IP Address from Subinterface with CLI in General Topics

Remove IP Address from Subinterface with CLI

rmfalconer — Tue, 19 Sep 2017 22:22:54 GMT

I'm trying to remove an IP address from a subinterface using the CLI.

Command I'm using is: 'delete network interface ethernet 1/8 layer3 units ethernet1/8.3624 ip x.x.x.x/29'

When I run this command, I get a message saying:

'No object to delete in delete handler'

I am able to remove all other configuration from the subinterface.

nextgenhappines — Tue, 19 Sep 2017 23:54:10 GMT

try this

in edit mode

type " run set cli config-output-format set " (without the quote).

type "network interface ethernet 1/8 layer3 units ethernet1/8.3624 "

and review the output, see if that a.b.c.d/29 still exists.

I just did a quick test on a PA220 running 8.0.4. I am able to remove the subinterface ip adderss. hope this helps,

rmfalconer — Wed, 20 Sep 2017 16:50:59 GMT

The command that I used to get it was:

delete network interface ethernet ethernet 1/8 layer3 units ethernet1/8.3624 ip x.x.x.x/29

There is an extra 'ethernet' included that I wasn't typing.