Problem with NAT

SergioHV — Wed, 04 Oct 2017 21:03:56 GMT

I have an interface layer 3 on Palo Alto device with an IP public X.X.X.X connected to a router with IP public X.X.X.Y, I can ping the IP of the router, but from the router to the Palo Alto does not have ping, I have a profile of management that allows the ping, additionally has a NAT with the IP X.X.X.Z which is only used to go out to internet but also from the internet or the router does not reach the IP X.X.X.Z, but the machine that does NAT can out to the internet.

The question is the IP X.X.X.Z (NAT) it should come from the internet by ping or is normal behavior that is not reached by ping (not even from the Palo Alto where it is configured)?

This IP X.X.X.Z in the arp table appears as incomplete.

Thanks

Re: Problem with NAT

Raido_Rattameister — Thu, 05 Oct 2017 00:23:51 GMT

Do you have block any/any rule anywhere before intrazone-default?

What is result if you filter Monitor > Traffic

( addr.dst in X.X.X.X ) and ( app eq ping)

So in NAT rule you have only Source Translation configured?

If yes is bi-directional checked or not?

Screenshots maybe?

topic Re: Problem with NAT in General Topics

Problem with NAT

Re: Problem with NAT