topic Re: Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel in General Topics

Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel

paulpaul — Tue, 17 Oct 2017 15:20:04 GMT

Hello,

Is there any guide available for creating Site-to-Site IPSec tunnel between Palo-Alto NGFW and Barracuda NGFW?
A generic guide would do the job.

I could go through the generic Phase1 & Phase2 configurations and troubleshoot from there but would be good if there is any suggested configurations available from Palo-Alto.

Thanks.

Re: Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel

BPry — Tue, 17 Oct 2017 20:50:33 GMT

@paulpaul,

I don't think there really are too many specific vendor configurations, as they would need to be kept up-to-date and most function the same anyways. Most of the vendor specific ones are either made by an outside source that can be found by a google search, or are needed due too the increased complexity of configuration.

If you run into any issues during setup I'd be happy to help you where I can, but I'm not aware of any Palo Alto to Barracuda guides you could go off of.

Re: Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel

jdelio — Tue, 17 Oct 2017 22:54:09 GMT

@paulpaul, here is a link to the "How to configure IPSEC VPN" article:

https://live.paloaltonetworks.com/t5/Configuration-Articles/How-to-Configure-IPSec-VPN/ta-p/56535

Please see that and other links at the bottom.

This should help if you need a generic guide.

Re: Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel

paulpaul — Wed, 18 Oct 2017 03:28:07 GMT

Thank you.

Re: Palo-Alto NGFW to Barracuda NGFW Site-to-Site IPSec tunnel

paulpaul — Wed, 18 Oct 2017 03:29:50 GMT

Thank you.
Yes, I am planning to do that as per generic site-to-site IPSec tunnel configuration.