PA-850 Default MTU

carlebert — Fri, 26 Jan 2018 15:47:43 GMT

I've had nothing but issues with our 850 HA pair since we've put them in production replacing a pair of 3020s. My previous thread here: https://live.paloaltonetworks.com/t5/General-Topics/PA-850-amp-Radius-PEAP/m-p/189233#M57311 detailed the initial main issue. The 8.0.6 firmware fixed a small portion of our radius issue, but the main fix was to set our tunnels on the 850 to 1448 MTU. After that, everything seemed to work fine.

Randomly, our 850s would be unable to communicate with all PAs using OSPF. They can still talk to a handful of devices using static routes, as well as a SonicWALL we still have using OSPF. The 850s still show all of the routes to the neighbors, however the remote sites do not show routes from the 850s. I can't recall what the neighbor state was on the remote end.

We've been working with support for weeks now trying to nail this down and I happened to come across an article talking about routing mtu. When I ran show routing fib I was surprised to see many of my interfaces come back at a MTU of 9126. At this point I realized that the global MTU was set to Jumbo frames by default. After disabling that on both of my 850s, rebooting, and removing the 1448 MTU on my tunnels, everything appears back to normal.

We definitely did not have jumbo frames enabled on our 3020s, so I'm pretty positive they came enabled by default on the 850s. Not sure if this is a mistake from the manufacturers image, or PA actually intended to release the 850s with jumbo frames by support, but I figured I'd post and possibly save some hair pulling for anyone else trying to swap in some 850s and seeing similar issues.

Re: PA-850 Default MTU

OtakarKlier — Fri, 26 Jan 2018 20:42:08 GMT

Hello,

While I am working through my own OSPF issues, my 800 series is defaulted to 1500 MTU. Not sure if its another bug you hit or not on that front?

Regards,

Re: PA-850 Default MTU

Brandon_Wertz — Mon, 29 Jan 2018 14:34:43 GMT

Thanks for circling back on this and sharing the info!!

topic Re: PA-850 Default MTU in General Topics

PA-850 Default MTU

Re: PA-850 Default MTU

Re: PA-850 Default MTU