topic MT v3.3.15 doesn't appear to import/upload PANOS xml file from my PA-820 running v8.0.7 in General Topics

MT v3.3.15 doesn't appear to import/upload PANOS xml file from my PA-820 running v8.0.7

ErnieLouie — Wed, 07 Feb 2018 20:44:58 GMT

I was trying to Upload a Panos XML file that I saved from the PA-820 to MT v3.3.15, but when I go to the "Zones" side-tab from the "Manage Networks, Routing, Zones", etc icon, I didn't see any of my existing zones. The upload action actually didn't appear to do anything except display a link to "media.paloaltonetworks.com/Ip/endpoint-security/" site.

Am I doing something wrong or is the PA-820 model (v8.0.7) not yet supported in the v3.3.15 Migration Tool? I question this because when I try to add the PA-820 model the the Device List, I don't see the "pa820" as an option. I only see:

m100, pa200, pa500, pa3000, pa4000, pa5000, pa7000, vm-series, and vm-panorama.

My goal was to Migrate (i.e. replace) a Cisco ASA 5510 with Palo Alto PA-820 and wanted to use the Migration Tool to do most of the heavy work.

Any advise is more that welcomed.

Re: MT v3.3.15 doesn't appear to import/upload PANOS xml file from my PA-820 running v8.0.7

ErnieLouie — Thu, 08 Feb 2018 00:07:13 GMT

Resolved: User error.... I did not use the pull-down menu to select the newly imported xml file. Once the correct file was selected, all the information (e.g. Zones, Interfaces, etc.) were displayed to be managed. The file selection field is on the top right of the page.

Re: MT v3.3.15 doesn't appear to import/upload PANOS xml file from my PA-820 running v8.0.7

dpflick — Fri, 04 May 2018 16:45:44 GMT

Where did you get 3.3.15? I can only find 3.3.11.