topic Re: Panorama Managed Devices Health in General Topics

Panorama Managed Devices Health

egistau — Sun, 11 Mar 2018 07:18:58 GMT

Hi,

I dont have any data to display in this new feature at panos 8.1

I have one panorama M100 and two PA5050 and two PA3020 all in 8.1 off course i see de fw at summary perfect.

I have been searching, but I did not find any recommendations for the configuration, I did not find any list of hardware supported, theoretically I should go out alone.

Thanks.

Re: Panorama Managed Devices Health

Brandon_Wertz — Sun, 11 Mar 2018 15:01:16 GMT

What is it that you're looking for?

Are you trying to use panorama to display to "status" of attached firewalls? Where statuses are things which could have an "impact" to the operation of the firewall?

Re: Panorama Managed Devices Health

Remo — Sun, 11 Mar 2018 15:19:10 GMT

Hi @egistau

In the documentation I cannot find something that you need to configure in order to have this informations available. Simply add a 8.1 firewall to a 8.1 panorama and it should work to view the health statistics on the managed devices pages ... https://www.paloaltonetworks.com/documentation/81/panorama/panorama_adminguide/manage-firewalls/device-monitoring-on-panorama/monitor-device-health.html

Regards,

Remo

PS: you either have a lot of lab devices or you are really brave to upgrade already to 8.1 😛

Re: Panorama Managed Devices Health

BPry — Sun, 11 Mar 2018 15:22:51 GMT

@egistau,

I recommend that you take a look at 8.1.0 release documentation, specifically bugs

PAN-91946

PAN-90736

PAN-51122

and see if you could be running into any of these specific issues that are known in 8.1.0.

I'm also going to recommend that you consider rolling back from 8.1.0, specifically on your M100, at this moment in time. If you take a look at that same exact document and run through the rest of the documented issues, the vast majority center around Panorama. 8.1.0 is fresh, and as such holds a lot of known issues and will continue to see new issues get added for the next little bit as more people deploy it. If this is production equipment I would suggest possibly holding off on 8.1.0 just yet, until you've reviewed all the known issues and decided that it'll actually work perfectly fine for your enviroment.

Re: Panorama Managed Devices Health

egistau — Sun, 11 Mar 2018 21:49:06 GMT

Hi Brandon

In Pan-os 8.1 can now track resource utilization, environmental conditions, and other key operational metrics over time and in bulk across large deployments.

This feature its nice for me.

thanks for answer.

Re: Panorama Managed Devices Health

egistau — Sun, 11 Mar 2018 21:54:53 GMT

Hi @Remo

Yes i read a lot documentation, the feature its simply, but not working in my Panorama.

I have only one lab device, we upgrade Panorama and four FW with 0 problems.

Thanks for answer

Re: Panorama Managed Devices Health

Remo — Sun, 11 Mar 2018 22:05:48 GMT

Hi @egistau

Then I recommend opening a TAC case to analyze this problem...

Re: Panorama Managed Devices Health

egistau — Sun, 11 Mar 2018 22:15:16 GMT

Hi @BPry

I read de issues:

PAN-91946 My problem its similar, in this case yo see the device and have false positve, my case its device list its empty. (attach photo with empty list and list of FW conected to panorama)

PAN-90736 empty list again

PAN-51122 I have two VM FW but in 8.x version

Thanks a lot for you recommendations, the other features of my panorama work fine.

Re: Panorama Managed Devices Health

egistau — Sun, 11 Mar 2018 23:11:42 GMT

Hi @BPry

The solutions are in konw issues of 8.1 PAN-94135 with a simple command.

thank you very much to all.