topic why commit is there without any change made in General Topics

why commit is there without any change made

marcowang — Fri, 08 Jun 2012 18:06:05 GMT

PANOS : v4.1.6

Model : PA-500

In the isolated LAB, only management port connected on PA-500 and service route operate well via the management port. I make sure the commit is grey after basic configuration (IP/netmask/gateway/DNS/NTP) set, license retrieved and application/threat prevention updated, and dynamic update scheduled, but the commit is not grey after power on for one day. I make sure there is no admin user login and no any config change in this period. And from PA WebUI Device-> Config Audit, compare running and candidate configuration, PA told me these two configuration is identical. Somebody else experienced this issue?

Re: why commit is there without any change made

sspringer — Mon, 11 Jun 2012 17:47:54 GMT

Hi,

There can be some cases that opening and closing an object in the WebUI without making changes can cause this behavior. This is cosmetic quirk and can be safely ignored after verfying with the config audit.

If changes were made, a commit performed and the commit button did not grey out then please open a case with support so we can investigate.

- Stefan

Re: why commit is there without any change made

Retired Member — Thu, 14 Jun 2012 06:04:38 GMT

Hi Stefan,

For your answer,

Does it is default behavior in firewall？

thanks,

Bruce