topic Re: Does VM-Series support AHV (Nutanix's Hypervisor)? in General Topics

Does VM-Series support AHV (Nutanix's Hypervisor)?

Komdet — Wed, 18 Apr 2018 12:01:02 GMT

AHV is the Nutanix's Hypervisor that its custom base-on KVM Hypervisor.

I've tested run vm-series on AHV and its working fine , but Paloalto official support or not?

Thank you.

Re: Does VM-Series support AHV (Nutanix's Hypervisor)?

BPry — Wed, 18 Apr 2018 15:51:25 GMT

AHV is not directly supported on any VM-Series at the moment. As you've already tested most hypervisors will work perfectly fine even when not supported. The issue with this is that TAC is likely going to label the hypervisor as the issue with any issue that you come across, because AHV is by no means tested or approved.

Re: Does VM-Series support AHV (Nutanix's Hypervisor)?

Komdet — Wed, 18 Apr 2018 16:22:28 GMT

@BPry

That menas , if I run vm-series on AHV for Production , I cannot open case support with TAC right?

Thank you

Re: Does VM-Series support AHV (Nutanix's Hypervisor)?

BPry — Wed, 18 Apr 2018 16:32:54 GMT

@Komdet,

It doesn't mean that you can't open support cases. It simply means that TAC is likely going to point to the fact that your VM is running on an unsupported hypervisor for the vast majority of any issues that you come across. It's the same if you were using non-supported transceivers in your firewall, any interface issues that you run into are likely going to be tied to the fact that your configuration is not supported and that the transcievers themselves could be causing your issue.

I wouldn't be too worried about recieving basic configuration guidance or working through GUI bugs or stuff like that on non-supported hypervisors. It's more of an issue where if you call in saying that an updated made your VM non-functional and they see that you are running this on AHV they'll likely finger that as the issue.

Re: Does VM-Series support AHV (Nutanix's Hypervisor)?

Komdet — Tue, 24 Apr 2018 06:03:10 GMT

I found this

https://www.nutanix.com/partners/technology-alliance-program/palo-alto-networks/

and

https://www.nutanix.com/documents/solution-briefs/palo-alto-networks-and-nutanix.pdf

It means AHV will come to official-support Hypervisor soon right.

hahaha i hope.

Re: Does VM-Series support AHV (Nutanix's Hypervisor)?

BPry — Tue, 24 Apr 2018 13:21:27 GMT

@Komdet,

It's possible that they've added AVH as a supported Hypervisor without updating the VM-Series documentation. I would reach out to your SE or Sales team and see if they can't verify that it is/isn't supported. The official documentation is pointing towards a no, but it wouldn't be the first time the documentation was slow to get updated 😉