Getting started Panorama 8.1

Retired Member — Thu, 26 Apr 2018 05:03:33 GMT

Ok, let just star by saying I am new to Panorama and I think understand the concept but just doesn’t work as expected. So I will just explain the end goal, I currently have an active/passive pa-500 pair that I am switching to two 3220 in an ha pair. Panorama is just planning for the future if I roll out 25 more devices to my remote offices.

Since the 3220s are new I just gave them a basic config to connect them to panorama. That went fine, so I started to configure the network settings with multiple templates and all hell broke loose. I have a simple base template with some very generic settings for our environment including security zones. So then I tried to assign a one to an interface in the other template for the ha pair and could not, it was not an option. Makes sense how would it know they are in the stack together.

Ok so I selected the stack. Now I am getting somewhere. I can override and see the zones but when I went to assign the zones to tunnels it doesn’t save. No error. The GUI just doesn’t save it, I select the zone on the tunnel and hit ok, and no zone. It two other tunnels let me.

I feel like I am fundementally missing something. Been playing with various template setups the last few days and came seem to get what I want.

Any thoughts?

Re: Getting started Panorama 8.1

Remo — Thu, 10 May 2018 21:36:28 GMT

Hi @Retired Member

May be you found a bug with that tunnel-zone-problem, because panorama 8.1 is already pretty new and has a lot of bugs. So first I would recommend you to update to 8.1.1 and try again.

topic Getting started Panorama 8.1 in General Topics

Getting started Panorama 8.1

Re: Getting started Panorama 8.1