asa to pan migration

josggf — Fri, 11 May 2018 07:10:50 GMT

i had a migration from asa to pan which failed

curent conectivity is

asa (no change)<>switch (no change)<>asa (to be replaced)

planned connectivity is

asa (no change)<>switch (no change)<>pan (replacing asa)

i reused ips from asa on new pan and cleared arp on no change asa but tcp sessions failed due to incomplete/aging out. static routing is fine. do i have to clear arp on pan as well since its installed in parallel and connected to the same l2 switch? it seems like a black hole issue...

Re: asa to pan migration

OtakarKlier — Fri, 11 May 2018 16:09:16 GMT

Hello,

Sounds like only a clear arp on the l2 switch should do it.

Hope that helps.

topic asa to pan migration in General Topics

asa to pan migration

Re: asa to pan migration