topic Re: Management profile setup on the outside interface for remote management, Panorama not communicating. in General Topics

Management profile setup on the outside interface for remote management, Panorama not communicating.

MikeJamrog — Mon, 29 Jun 2015 22:11:16 GMT

I have a management profile setup on my outside interface at a VPN site for remote management.

I have my in-band management port settings set to blank fields. Panorama doesn't establish communication with this firewall.

I am wondering if it is because the management ip information is blank, or do I need to configure something else to allow Panorama to communicate with this device?

Thanks,

Mike

Re: Management profile setup on the outside interface for remote management, Panorama not communicating.

pulukas — Tue, 30 Jun 2015 00:24:56 GMT

did you setup the service route for management access on the selected port.

Setting a Service Route for Services to Use a Dataplane Interface from the Web UI and CLI

Re: Management profile setup on the outside interface for remote management, Panorama not communicating.

MikeJamrog — Tue, 30 Jun 2015 00:57:49 GMT

I was just watching the PA firewall configuration essentials videos.

It looks like I have to change this under the Service Route Configuration.

Device > Setup > Services and select Panorama and select my management ip.

Thanks,

Mike