topic Re: Custom Syslog sender From Cisco WLC in General Topics

Custom Syslog sender From Cisco WLC

Radmin_85 — Mon, 25 Jun 2018 15:55:20 GMT

We have wireless users.Cisco WLC directly sends syslog to PA.We have to parse it correctly.But after doing we get the following

We also implemented agentless AD integration.We want users authenticated through AD could connect to some internal resources passing through FW.

But when we type show user ip-user-mapping all type SYSLOG

we see the following

Re: Custom Syslog sender From Cisco WLC

BPry — Mon, 25 Jun 2018 16:57:07 GMT

@Radmin_85,

Can you run 'show user ip-user-mapping ip <value>' replacing <value> with an IP address that should currently be mapped to a user. My guess would be that the parsing isn't setup correctly and the firewall is using the SSID, MAC, and the actual user recieved on the WLC as the user information when it parses the logs.

Here's some guides, abeit old, that actually walk you through the process.

https://live.paloaltonetworks.com/t5/Integration-Articles/Use-Syslog-Receiver-to-Integrate-with-Cisco-Wireless-Controller/ta-p/52824

https://supportforums.cisco.com/legacyfs/online/attachments/discussion/cisco_wlc_-_palo_alto_networks_config_guide.pdf

Re: Custom Syslog sender From Cisco WLC

Radmin_85 — Mon, 25 Jun 2018 19:46:17 GMT

there is no mapping