topic Re: Arris (AT&T Fiber) to PA-220 in General Topics

Arris (AT&T Fiber) to PA-220

ckg1999 — Thu, 27 Sep 2018 13:33:58 GMT

All,

I have an Arris (BGW210-700) set up as 192.168.2/24 (DHCPed) and have successfully configured the IP Passthrough to the PA-220. However, I am unable to get outbound from the PA-220.

Has anyone run across this? I have the Arris going into 1/1 (as WAN), and then providing internal routing / DHCP, etc. This was working when I had Frontier / Verizon FIOS, but we switched carriers.

Thanks!

Re: Arris (AT&T Fiber) to PA-220

OtakarKlier — Thu, 27 Sep 2018 14:03:57 GMT

Hello,

I take it the fiber was tested with like a laptop to make sure it was active? Also are there any drops/blocks in the PAN logs? I also assume you dobule checked the PAN config in terms of the new dhcp subnet?

Please advise,

Re: Arris (AT&T Fiber) to PA-220

ckg1999 — Tue, 02 Oct 2018 19:05:07 GMT

I was able to make it work, by forcing key Gateway and DNS settings, along with re-ip (no overlap) of the prior router.