topic Re: PaloAlo ports not coming up! in General Topics

PaloAlo ports not coming up!

qasim02 — Fri, 05 Oct 2018 09:38:48 GMT

Hi,

I am configuring some new PA850s and interfaces are set to Vwire mode. ports are connected to cisco switch but they are not coming up.

they come up and go down. here are settings from cisco side:

speed 1000
duplex full
no mdix auto

paloalto ports:

speed 1000 and everything auto.

Can you please help?

Regards,

JoeAndreini — Fri, 05 Oct 2018 12:22:12 GMT

Did you try setting duplex auto on cisco or duplex full on palo alto?

IIRC it must be auto or not on both sides.

qasim02 — Fri, 05 Oct 2018 12:43:52 GMT

other firewalls alr3adybworking with same settings

welly_59 — Fri, 05 Oct 2018 12:53:33 GMT

set auto both sides, or hardcode both sides

qasim02 — Fri, 05 Oct 2018 13:03:50 GMT

thanks I will try that. however, now I can login to the firewalls with default account, using guys and cli.

qasim02 — Fri, 05 Oct 2018 13:05:00 GMT

thanks I will try that. however, now I can login to the firewalls with default account, using guys and cli.

qasim02 — Fri, 05 Oct 2018 13:05:22 GMT

I mean I can't!

OtakarKlier — Fri, 05 Oct 2018 13:23:50 GMT

Hello,

Set both ports to Auto. The PAN cannot be forced to full duplex for a 1gb link. This is because a 1gb link cannot be half duplex.

Hope this helps.