https://live.paloaltonetworks.com/t5/general-topics/no-statistics-on-log-collector-local-to-panorama/m-p/237186#M67963 The question is, how do i verify that it’s the local log collector receiving logs, in a multi interface environment like i have Thu, 25 Oct 2018 21:44:29 GMT josggf 2018-10-25T21:44:29Z https://live.paloaltonetworks.com/t5/general-topics/no-statistics-on-log-collector-local-to-panorama/m-p/237146#M67955 <P>Hi</P><P>I have an active-standby M-500 setup</P><P>Local-log connectors in one device group have been configured</P><P>i have also enabled multi interface on the panorama, mgmt has collector group communication only. Log collections is enabled on eth1</P><P>have configured log-forwarding profile and check panorama, firewall shows its connected to the log collector with eth1 ip</P><P>also can see logs on the monitor tab in panorama</P><P>problem is, the statistics for log-collector in Panorama GUI show&nbsp;0 logs/sec.</P><P>&nbsp;i think logs are still going to panorama itself, instead of the log-collector...</P> Thu, 25 Oct 2018 19:21:54 GMT https://live.paloaltonetworks.com/t5/general-topics/no-statistics-on-log-collector-local-to-panorama/m-p/237146#M67955 josggf 2018-10-25T19:21:54Z https://live.paloaltonetworks.com/t5/general-topics/no-statistics-on-log-collector-local-to-panorama/m-p/237186#M67963 The question is, how do i verify that it’s the local log collector receiving logs, in a multi interface environment like i have Thu, 25 Oct 2018 21:44:29 GMT https://live.paloaltonetworks.com/t5/general-topics/no-statistics-on-log-collector-local-to-panorama/m-p/237186#M67963 josggf 2018-10-25T21:44:29Z