topic Re: global protect client - config refresh test and verify in General Topics

global protect client - config refresh test and verify

MP18 — Wed, 07 Nov 2018 05:05:40 GMT

Is there any way i can test and verify the config refresh time in global protect client running 4.1.4?

Mick_Ball — Wed, 07 Nov 2018 14:54:05 GMT

how about setting the refresh rate to 1 hour and "allow user to disable GP" = disallow

connect via GP to get new app config.

leave device connected and then modify "allow user to disable GP" = allow

stay connected for 1 hour and see if you have the option to disable the client.

MP18 — Wed, 07 Nov 2018 15:17:26 GMT

giving it a test

Mick_Ball — Wed, 07 Nov 2018 15:26:13 GMT

yeah me too... set it off justr after 3 so will update,,,, gonna check the logs also to see if it is mentioned in there...

Mick_Ball — Wed, 07 Nov 2018 16:01:51 GMT

cool.... disable option is now visible...

and the log says... msgtype = refresh-configuration

and tunnel stayed connected.

MP18 — Wed, 07 Nov 2018 16:45:23 GMT

for we it did not work

i end the process and killed the process

same thing

MP18 — Wed, 07 Nov 2018 16:46:27 GMT

where u see this log

msgtype ?

Mick_Ball — Wed, 07 Nov 2018 16:50:34 GMT

from collected logs on the GP client.

Mick_Ball — Wed, 07 Nov 2018 16:52:42 GMT

pangps log

Mick_Ball — Wed, 07 Nov 2018 17:00:20 GMT

(T4032) 11/02/18 01:53:29:201 Debug(7120): RefreshPortalConfig is yes, RefreshPortalConfigInterval is 1 hours

(T4032) 11/02/18 02:53:33:170 Info ( 438): msgtype = refresh-configuration

MP18 — Sat, 10 Nov 2018 02:22:30 GMT

Thanks for helping me out.