topic PA VM Interface Issue in General Topics

PA VM Interface Issue

Lakshitha — Mon, 03 Dec 2018 10:22:14 GMT

Dear All,

I setup test lab with vmware workstation. only ethernet1/1 interface is up. Others are down mode. I have attached screen also . Please advice me.

Thanks,

Lakshitha.

Re: PA VM Interface Issue

BPry — Tue, 04 Dec 2018 01:37:24 GMT

@Lakshitha,

It doesn't actually look like you attached anything 😉

Have you verified that you've enabled promiscuous mode and Mad Address changes within the VMWare configuration?

Re: PA VM Interface Issue

aleksandar.astardzhiev — Wed, 05 Dec 2018 09:44:04 GMT

I also would suggest to enable "Use Hypervisor Assigned MAC Addresses" under Device -> Setup -> Management -> General Settings

Re: PA VM Interface Issue

jarbu — Thu, 06 Dec 2018 14:46:31 GMT

Workstation add new interfaces (not default ova interfaces) as E1000 and vm-series requires vmnet3 to work properly. You can reconfigure this in config file. Did you checked this?

Did you configured properly that 'down' interfeces (zones, IPs, etc)?