topic Re: Reset ports to default settings in General Topics

Reset ports to default settings

Sly_Cooper — Tue, 08 Jan 2013 13:27:54 GMT

Hi,

How do I set the port to default settings. Once you configure a port, if you don't use it still shows as Red color. I would like to set it to default set where the color is gray.

Thanks in advance.

Re: Reset ports to default settings

nbilly — Tue, 08 Jan 2013 15:32:34 GMT

Hello,

If you are not using the port anymore; from GUI, your can select the port and delete it.

After committing the change, it will be resetted to his default gray color.

Best Regards

-Nicolas

Re: Reset ports to default settings

sdurga — Tue, 08 Jan 2013 18:02:11 GMT

From CLI

"delete network interface ethernet ethernet1/5". However this command when used in 5.0 is giving the following output !!!

-Sandeep