topic Re: why is interface has no zone configuration？ in General Topics

why is interface has no zone configuration？

sobigfat — Wed, 30 Jan 2019 02:59:45 GMT

Configure the following alarms
The interface also cannot ping

Where is the configuration problem?

Re: why is interface has no zone configuration？

BPry — Wed, 30 Jan 2019 04:04:28 GMT

Validate what the configuration is showing in the CLI, and if it matches the GUI try running the validate within the CLI instead of the GUI.

Re: why is interface has no zone configuration？

reaper — Wed, 30 Jan 2019 14:41:26 GMT

see if something odd shows up in config audit, then try a 'revert to running'

Re: why is interface has no zone configuration？

sobigfat — Thu, 31 Jan 2019 06:46:42 GMT

@BPry

Configuration I have committed, but there is still no regional configuration in the CLI.

I reset the device, it will work normally after reconfiguring according to the original configuration, and the CLI can also see the area information.

Re: why is interface has no zone configuration？

sobigfat — Thu, 31 Jan 2019 06:49:11 GMT

@reaper

Very strange, the device is reset, there is no other configuration, I have no way, the configuration can work normally after resetting the device again.