topic Re: GUI shows interface CLI shows Int not found in General Topics

GUI shows interface CLI shows Int not found

MP18 — Tue, 12 Feb 2019 17:45:41 GMT

Web gui shows interface eth1/23

But cli

show interface ethernet1/23

Server error : Interface 'ethernet1/23' not found

show system state | match capa
cfg.general.is-admin-login-saml-capable: False
peer.cfg.general.is-admin-login-saml-capable: False
sys.s1.ha1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p10.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p11.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p12.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p13.capability: [ auto, 1Gb/s-full, ]
sys.s1.p14.capability: [ auto, 1Gb/s-full, ]
sys.s1.p15.capability: [ auto, 1Gb/s-full, ]
sys.s1.p16.capability: [ auto, 1Gb/s-full, ]
sys.s1.p17.capability: [ auto, 1Gb/s-full, ]
sys.s1.p18.capability: [ auto, 1Gb/s-full, ]
sys.s1.p19.capability: [ auto, 1Gb/s-full, ]
sys.s1.p2.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p20.capability: [ auto, 1Gb/s-full, ]
sys.s1.p21.capability: [ auto, 10Gb/s-full, ]
sys.s1.p22.capability: [ auto, 10Gb/s-full, ]
sys.s1.p23.capability: [ auto, 10Gb/s-full, ]************************************************

Re: GUI shows interface CLI shows Int not found

aleksandar.astardzhiev — Wed, 13 Feb 2019 08:06:32 GMT

It looks like this interface is not configured.

Have you commint and changes on this interface?

What colour is shown under the GUI for this interface?

Re: GUI shows interface CLI shows Int not found

MP18 — Wed, 13 Feb 2019 16:14:42 GMT

So is it by design if interface is not configured it will not show up in CLI?

Re: GUI shows interface CLI shows Int not found

gwesson — Thu, 14 Feb 2019 00:29:27 GMT

Yes. There's nothing to display if the interface is unconfigured.

Technically the GUI doesn't display anything either if it's unconfigured. It has a line item to let you actually configure it when ready, but every column is empty.

It's the same with CLI. Your "show interface" shows only the actually configured interfaces (much like the columns in the GUI) where the system state shows all possible interfaces (like the interface names in the GUI).

Think of that CLI output of showing the columns of the GUI for the interface. If there's nothing to display, there's nothing that will be displayed.

Re: GUI shows interface CLI shows Int not found

MP18 — Thu, 14 Feb 2019 02:45:38 GMT

Many Thanks for answering the question