topic Re: Configuring QoS settings multiple egress interfaces in General Topics

Configuring QoS settings multiple egress interfaces

wfleitz — Wed, 29 Aug 2012 19:28:19 GMT

We currently have our PA-5050 configured with two vWire ingress and two vWire egress interfaces (one trust and one untrust zone mapped to vWire-1 and one trust and one untrust zone mapped to vWire-2). In this configuration is it possible to configure QoS? I see that when configuring QoS on the interface you only have the option to select a single interface. Is there a way adding two interfaces to the QoS? Thanks.

Re: Configuring QoS settings multiple egress interfaces

mikand — Wed, 29 Aug 2012 22:08:16 GMT

Setup a QoS profile and assign it to whichever interface(s) you like.

However im not sure if QoS is suitable to use in vwire situations.

Re: Configuring QoS settings multiple egress interfaces

sdurga — Thu, 30 Aug 2012 08:13:24 GMT

This doc is about QoS in pan, it might be helpful for you. Configuring QoS on V-Wires should not be any different than configuring it on other type of interfaces.

https://live.paloaltonetworks.com/docs/DOC-3439

Re: Configuring QoS settings multiple egress interfaces

wfleitz — Thu, 30 Aug 2012 17:55:52 GMT

Thanks for your helpful responses. We'll go ahead and create the QoS profile and apply it to both egress interfaces and see how that works out.